Configuring and Managing the DHCP Server Role Essay

Question 1 What is the name of the computer you are working from? W2K8xx Question 2 What is the default lease duration of a Wired subnet type? 6 days Question 3 What are three recommendations listed in Server Manager for managing the DHCP Server role? Increase fault tolerance Eliminate manual updates Allow remote Administraition Question 4 What is the name of the computer you are working fro W2K8yy Question 5 What IP addressing settings are currently configured? 10.10.1.101 Question 6 Is the computer currently configured for DHCP? How can you tell? No, it is stated in the cmd Question 7 What is the IP address of the DHCP server from which W2K8yy has obtained its IP address? 000.000.000.000 Question 8 If the answer to #7 was not the IP address of the W2K8xx computer, why might this have happened? It is not enabled Question 9 What nodes appear underneath the DHCP scope that you created in Exercise 3-1? Address pool address leases Question 10 What appears in the IP address text box? 192.168.11.1 Question 11 What value is configured in the DNS Servers: line? 172.16.2.3 172.16.4.5 Question 12 What value is configured in the DNS Servers: line? 172.16.2.3 172.16.4.5 Question 13 What is the default location for DHCP server backups? DHCP > backups Question 14 What IP address is configured on the W2K8yy computer? 172.16.227.55 Question 15 What appears in the IP address text box? 172.16.227.55 preferred Question 16 From which DHCP server are you receiving an IP address? From corexx computer Lab REview Questions Completion time 15 minutes 1.In your own words, describe what you learned by completing this lab. 2. You have installed the DHCP Server service on a computer running Windows Server 2008. You configure and activate a 10.0.0.0/24 scope; however, clients still are receiving a 169.254.x.x IP address. What should you do? 3. Configure the ip address so both are in the same format 3.You have configured a DHCP scope with an address range of 192.168.0.1 through 192.168.0.254. You have several servers and printers that use the IP address range of 192.168.0.1 through 192.168.0.20. With the least amount of administrative effort, how can you prevent duplicate IP addressing? Log which IP addresses go to what so that you dont assign the same one twice 4.You currently are using a DHCP server on your network. It assigns a default gateway scope option to clients. You use a router with a different IP address to replace a router on your network. The new router allows clients to connect to the Internet; however, clients cannot connect to the Internet using the new router. What should you do? That makes no sense you just told me the new router allows clients to connect to the internet